Offshore Refuelling Systems Aviation Refuelling
Avery Hardoll / Whittaker
OPW Fuelling Nozzles
Fuel Delivery
Satam Meters Pumping Systems
Master Meters
Aviation Refuelling Vehicles
Aviation Fuel Testing Equipment
Mann Teknik Dry Break Couplings
Mining Lub Trucks
Storage Tanks
Composite Matting
Density Meters
Satam Meters
Thanks to its advanced technical design, SATAM is able to cover the entire range of flow rates, from 20 l/mn ( 5 USGPM) to 4200 l/mn (1100 USGPM), by the simple addition of measuring chambers.
Operating Principle
The product enters the measuring chamber at (A) following the direction of the arrows. The rotor and blades assembly (1-2) is set in motion by the pressure of the liquid on blades.
A certain amount of liquid (3) is held between two blades, measured and then directed towards to discharge manifold (B). The volume of liquid measured at easch rotation is therefore equal to 4 times the measured quantity (3).
Accuracy is provided by the extremely small clearance between the different elements of the meter.
The smooth curves of the meter pieces provide a steady, non-fluctuating flow, resulting in low head loss.
In mechanical version, an extended rotor shaft transmits its movement to the meter head using a calibrating device. The mechanism of the meter adjustment is stepless.
Mechanical Calibrating Mechanism
All the meters in the SATAM range are equipped with a Continuous adjustment calibrating mechanism. All meters are tested in the factory before delivery to the customer. This very accurate mechanism is based on the principle of differentials. By means of a calibration screw we can adjust as follows:
POSITIVE DISPLACEMENT METERS
Applications
SATAM meters are Positive Displacement type meters. Their great efficiency has earned them a world-wide reputation :
Measuring ChamberApplications
Oil DepotsAdvantages
Tank trucks distribution
Airports : Aircraft refuellers
Army : depot reception or loading trucks
Administration (Railway companies, Public transport)
Ports : boats / barges
Mines : loading truck fleets
Private Oil Transport Companies
SATAM meters are Positive Displacement type meters. Their great efficiency has earned them a world-wide reputation :
Special design featuring a meter manifold in line and a seperate measuring chamber. This protects the measuring chamber from any eventual stress and strain from the installation piping.
High accuracy over a wide range of flow rates, superior by 1 to 10 to Weights and Measures requirements.
Very low repeatability error, less than 0.04%
Low head loss : 0.5 bar maxi (0.3 bar for the ZC17-24 and 48 models)
Exceptional accuracy over time, the accuracy curve of the meters hardly varying over a long period of use.
Service and maintenance simplified by the use of many identical and interchangeable parts.
Simplicity of design, the only moving parts being the 2 sets of blades and the rotor. This keeps maintenance costs to a minimum.
A wide range of accessories can be used to build metering units specially adapted to customer requirements.
Thanks to its advanced technical design, SATAM is able to cover the entire range of flow rates, from 20 l/mn ( 5 USGPM) to 4200 l/mn (1100 USGPM), by the simple addition of measuring chambers.
Operating Principle
The product enters the measuring chamber at (A) following the direction of the arrows. The rotor and blades assembly (1-2) is set in motion by the pressure of the liquid on blades.A certain amount of liquid (3) is held between two blades, measured and then directed towards to discharge manifold (B). The volume of liquid measured at easch rotation is therefore equal to 4 times the measured quantity (3).
Accuracy is provided by the extremely small clearance between the different elements of the meter.
The smooth curves of the meter pieces provide a steady, non-fluctuating flow, resulting in low head loss.
In mechanical version, an extended rotor shaft transmits its movement to the meter head using a calibrating device. The mechanism of the meter adjustment is stepless.
Mechanical Calibrating Mechanism
All the meters in the SATAM range are equipped with a Continuous adjustment calibrating mechanism. All meters are tested in the factory before delivery to the customer. This very accurate mechanism is based on the principle of differentials. By means of a calibration screw we can adjust as follows:
on ZC.17.12 Meters:
1 notch = 0.025% (adjustment range: 4% maximum)
on ZC.17.24/24 and ZC.17.24/48 Meters:
1 notch = 0.025% (adjustment range: 4% maximum)
on ZC.17.80/80, ZC.17.80/150 and ZC.17.80/250 Meters:
1 round = 0.1% (adjustment range 1.2% maximum)
Materials
Manifold: Steel or Aluminium Body: Ni-Resist cast iron
(Aluminium for 12m³/h)Covers: Steel kanigen Rotor: Aluminium Blades: Carbon Bearings: Stainless steel Seals/gaskets: Viton
Accessories
In the standard version, SATAM Meters
are supplied with manifold and Register.
A wide range of accessories can be supplied with the meters:
Preset Counters, with mechanical or electrical preset valve.
Ticket Printers
Rate of flow Indicators
Pulse Transmitters
Flow Governors
Temperature compensation with correction volume
Additive Injectors (3", 4", 6" meters)
Strainers
Air Eliminators or Air Separators
Accuracy and Head Loss
Possible Configurations (3", 4" and 6" Meters)
Dimensions and Technical Data
| ZC 17 12 | ZC 17 24 | ZC 17 48 | ZC 17 80 | ZC 17 150 | ZC 17 250 | ||
| Flanges | Flanges
SATAM supplied with counter flanges (60mm) |
ASA
150 RF - SF (ANSI B 16-5) |
|||||
| Size | Inches | 2" | 2" | 2" | 3" | 4" | 6" |
| Vol. per cycle | Litres | 0.33 | 0.40 | 0.80 | 2.27 | 4.54 | 6.82 |
| US Gallons | 0.08 | 0.08 | 0.17 | 0.5 | 1 | 1.5 | |
| Counter graduation | Litres | Yes | Yes | Yes | Yes | Yes | |
| Decalitres | Yes | ||||||
| Max. flow rate | m³/h | 12 | 24 | 48 | 80 | 150 | 250 |
| l/mn | 200 | 400 | 800 | 1333 | 2500 | 4166 | |
| USGPM | 53 | 105 | 210 | 360 | 660 | 1100 | |
| IMPGPM | 44 | 90 | 176 | 295 | 550 | 915 | |
| Min. flow rate | m³/h | 1.2 | 2.4 | 4.8 | 8 | 15 | 25 |
| l/mn | 20 | 40 | 80 | 133 | 250 | 416 | |
| USGPM | 5.3 | 10.5 | 21 | 36 | 66 | 110 | |
| IMPGPM | 4.4 | 9 | 17.6 | 29 | 55 | 91 | |
| Max. operation pressure | Bar | 8 | 8 | 8 | 10 | 10 | 10 |
| PSI | 116 | 120 | 120 | 150 | 150 | 150 | |
| Kg/cm² | 8 | 8.3 | 8.3 | 10.5 | 10.5 | 10.5 | |
| Working temp. range | -40°C
(-40°F) to + 60°C (+140°F) |
||||||
| Viscosity max. | 800
Cps / 3850 SSU |
||||||
| Weight net | Kgs | 14 | 20 | 25 | 56 | 85 | 141 |
| Lbs | 31 | 44 | 55 | 123 | 187 | 311 | |
| Gross weight (sea packing) | Kgs | 32 | 38 | 43 | 95 | 124 | 180 |
| Lbs | 70.5 | 84 | 95 | 209 | 273 | 397 | |
| Dimensions: | |||||||
| Between flanges | mm |
180 | 180 | 180 | 356 | 432 | 400 |
| (inch) | 7 | 7 | 7 | 14 | 17 | 15.7 | |
| Width | mm | 180 | 287 | 287 | 356 | 432 | 400 |
| (inch) | 7 | 11.3 | 11.3 | 14 | 17 | 15.7 | |
| Depth | mm |
215 | 235 | 269 | 370 | 497 | 675 |
| (inch) | 8.5 | 9.3 | 10.6 | 14.6 | 19.6 | 26.6 | |
| Height | mm | 221 | 406 | 406 | 405 | 405 | 568 |
| (inch) | 8.7 | 16 | 16 | 16 | 16 | 22.4 | |